Question about Singer Sewing Machines
...sync. The Needle is late. My Singer Millennium is out of sync. The Needle is late. How do I adjust the gears to correct the timing. Any suggestion is appreciated. Thanks in advance. TR Timing ...
Question about Singer Sewing Machines
...to replace a busted gear on my wife's sewing machine. now the needle/bobbing is not in sync. how do i adjust the timing of the neecdle/cam look here: ...
...sync problems with the needle hitting the bobbin assebely and bending or breakink the needle timing probably out then, best handled by a technician needle hitting bobbin case on a white classic ...
Question about Simplicity Sewing Machines
...likely the machine has been knocked out of time--the needle and hook do not sync. Search for sewing machine timing or take it for service. check needle / hook timing increase tension on needle ...
...sync. or needle size is too small for weight of fabric you are sewing. check out www.sewing.about.com for needle size info and use new needle for each new project. if yoy suspect timing out take to ...
Question about Sewing Machines
My BM 2600 needle threader seems not working, I can't make the thread go in the needle. Can you help me. Thanks. If your needle is too small, the threader cannot fit through the eye. It's usually ...
...sync with the needle. with the needle down all the way, this hook grabs the upper thread and creates the loop for the stitch. sounds like the needle is too long. check your operating manual for ...
...sync with the needle and has broken numerous needles - how can we get the bobbin back in alignment with the timing of the needle???? [email protected] Hello, My bobbin holder is out of sinc with the ...
...sync with the needle bar and hook. What is the sequence neccessary to put the feed back in sync? It would be in the Service Manual for your machine. That is a common adjustment that technicians make ...
Can't find the manual for the Husqvarna Viking Emerald 116. How is the needle side to side action controlled? Our machine is not syncing properly and so the needle hits the metal bobbin case plate. ...
161 questions posted
Usually answered in minutes!
126 Questions
111 Questions
69 Questions
52 Questions