Kenmore Drop-In Bobbin 16231 Mechanical Sewing Machine "bobbin case tension loose" Questions

...bobbin case, hold it only by the thread. If the bobbin and bobbin case fall, the tension is too loose. If this is the case, turn the bobbin tension screw 1/4 turn until the bobbin and bobbin case do ...

...bobbin case tension adjustment: When the bobbin runs out, sometimes it bends the bobbin case tension spring. Then tension is too light. Take the bobbin case out of the machine. Tie the loose bobbin ...

bobbin case and not a drop in bobbin. Let me know if you have a drop in bobbin: Setting bobbin case tension: Put wound bobbin in bobbin case. Thread it in case. Hold the thread and carefully let go of

...bobbin case. Use a half-full to 3/4 full bobbin. Be sure it is threaded through the bobbin case with thread hanging straight down with tension spring on top. Tie the stitch plate to the end of the ...

...bobbin case? In most cases, this is caused by loose threads and fluff being in the upper tension unit rather than a problem with the bobbin. There is a screw on the bobbin case that losens and ...

bobbin case--check area for loose threads or lint the needle may be bent or damagedthread may be hanging up in bobbin case--check area for loose threads or lint upper tension may be to tightthe needle

...bobbin case. Mark the **** (in the screw head) position on the bobbin case with tiny dab of nail polish so you will know where the original setting was. Left/loose and right/tight. If you are ...

...Threads If it is in fact the bobbin thread causing looping, it could be that the bobbin case is not threaded properly or the tension is way off. Liz Kettle adjusting your bobbin case tension 1 wmv

bobbin case. Tension should be just enough that you can suspend the bobbin in the case by the thread (think yo-yo). Upper tension should be tighter than lower. Make sure you put the presser foot down.

...bobbin case, check top tension and bobbin case are free of lint, reset the top tension to 4, and adjust the bobbin tension to suit......some more detail on how to do that, is here Bargain Box Lame ...