Krups FDK2 Waffle Maker "iron stopped heating" Questions

My scooby doo waffle iron will not heat, it initially got hot then stopped heating. Can it be fixed it is posible, but is posible to be expensive

...heating element is on. The green light will cycle on and off as the thermostat controls the temperature. Allow the iron to heat til the green light goes off before adding batter. Watch for steam ...

...iron (Krups 654-75) died, no light, no heat. I have continuity on both heating elements but there is a little device which looks like a diode but may be a thermostat which has no continuity. It is ...

...stopped heating. There is a thermal fuse inside the bottom half of the unit, enclosed in a white insulating sleeve. This appears to be the weak part of the circuit. A replacement can be found here on ...

what is the component inline on the hot lead of a Sensio 13278 belgium waffle maker. the unit stop heating and I believe this component is bad. i think youl find its the thermostate little silver ...

My Waring Mod# 150 Waffle maker went out in the middle of cooking a waffle and stopped cooking. The red light is on ,but the green light wont come on. there is a thermostat in the waffle maker if its ...

heating up is because of a blown thermal fuse. Apparently the controller lets the iron get too hot or the fuse is out of manufacturing tolerance - and so the fuse opens. The green lamp is normally lit

...iron stopped working. i was wondering if there was something i could do to reset it or if i should just return it. Check the outlet that it was plugged into. If you used it in a kitchen it may have ...

...maker suddenly stopped heating. What should I look for to repair it? There is a thermal fuse in series with the wires that go to the heating elements. The thermostat may have stopped working