Rainbow E series Canister Wet/Dry Vacuum "cleaner turn" Questions

turn cleaner over so bottom side is up. 2. To remove bottom plate, insert end of flat screwdriver into wide area of right-hand slot and push handle of screwdriver to the rear. Repeat in left-hand slot

turn cleaner over so bottom side is up. 2. To remove bottom plate, insert end of flat screwdriver into wide area of right-hand slot and push handle of screwdriver to the rear.Repeat in left-hand slot.

turn cleaner over so bottom side is up. 2. To remove bottom plate, insert end of flat screwdriver into wide area of right-hand slot and push handle of screwdriver to the rear.Repeat in left-hand slot.

turn cleaner over so bottom side is up. 2. To remove bottom plate, insert end of flat screwdriver into wide area of right-hand slot and push handle of screwdriver to the rear.Repeat in left-hand slot.

turn cleaner over so bottom side is up. 2. To remove bottom plate, insert end of flat screwdriver into wide area of right-hand slot and push handle of screwdriver to the rear.Repeat in left-hand slot.

...not seized up. If it turns but very hard to turn, you probably have hair inside the bearings. Turn vacuum cleaner over and clean it out. Once hair gets inside the bearings it may impossible to

...cleaner back in and turn on the switch. If the cleaner still does not run, then call 1-800-282-2886 for customer assistance this link below is the manual ...

turn on the cleaner, the brushes will turn, but then they stop. What do you think is wrong? Thanks Hi, The belt is shot and when it heats up it strecthes even more so that the brush will not turn then

...Turn the Hoover carpet cleaner over, and inspect the brush area. Debris, strings, or pet hair may be tangled in the rollers, keeping them from turning. Use a pair of scissors to cut away any ...

...cleaner shuts off when you turn off the beater bar or try to use the hose, it's possible that there is a blockage or obstruction in the hose or the wand. The vacuum cleaner may be equipped with a ...