Question about Uniden Radio Communications
...radio BCD386XT No sound. If it is actually stopping on an active broadcast and if you have the volume turned up (press down on volume button and release, then rotate to adjust) then the most likely ...
...volume and conversation, but no way to see who is talking and can not load anything new in. This problem is caused by oxidation on the cable tip. All that has to be done is pull the flex cable from ...
...radio successfully before, I have to assume it is "new to you" and that you have never seen it work or used one like it before. Start with a few basic settings below: Turn Squelch to minimum. Set RF ...
...causes more impedance at the higher frequencies than at the lower ones (uhf is higher than vhf), also hum could come from a power supply that can't produce enough current, does it get worse when you ...
...to go to a store where they knew their stuff. I do understand that many Radio shackstores do not have this calaber of help but not all stores have the volume of sales to support this calaber of
wanted manual realistic 2010scanner I purchased a 2010 scanner and cant get it to manually go through all frequencys, only comes up on already progamed and locked frequencys The realistic 2000 series ...
29 questions posted
Usually answered in minutes!
247 Questions
183 Questions
153 Questions
141 Questions
155 Questions
