Acer Aspire 5742 Notebook "reset battery" Questions

...reset by removing the battery and there is no jumper for the CMOS or bios reset. You must go to Acer to obtain the master password as laptop computers have NVRAM (non-volatile RAM) that retains the ...

... Remember not to tuch anything else or connect any of the cables any where else it may cause a problem for the sys and you. Once the CMOS battery is reset the BIOS password will have gone. All the ...

...reset battery on laptop for an aspire 5731 My battery wont hold charge it has shown 100% then a second later dropped to 0 has not been charging. There is no such thing as a reset on a battery. The ...

reset. Test. Insert battery & test if problem is not solved. If all the above don't work, you'll need to take the netbook apart, locate the 3V coin-cell battery on the motherboard & wait for 1

...battery in a desktop that will reset the bios, but I'm not sure about laptps. can not do a thing with the bios being passworded. HELP, HELP, HELP ! Hello, There are 2 ways you can reset your bios. 1. ...

...reset bios password? You have to disassemble your PC and remove CMOS battery for 5 minutes then try to power on without battery and without getting everything back together so you eject any trace of ...

...battery will reset my password. Is that true? And if so how do I remove the battery? if you will remove the cmos battery it will reset all settings to the default ...or optimal defaults ...and indeed ...

...battery 4. Power it on and power it off to reset the BIOS 5. This should work for passwords 6. Moreover, it resets to default configuration Please share the results. Regards, Anirban Mazumdar visit ...

...battery...Bios password will be reset. Warning ! All these operations must be made after you remove main battery and of course, unplug the power supply. As an exception, for some Toshiba only, this ...

...battery or set the reset jumper to reset, with the primary laptop battery removed, and the ac adapter disconnected, hold the power button for 30 seconds to a minute, then re-assemble and reset jumper ...