...XU35. Mine was starting up and showed a picture for about 15 - 30 seconds then shutting down. My lamp warning light was not coming on. When I put it in for repairs it turned out to be the lamp that ...
Question about Sanyo Office Equipment & Supplies
...the green power light will stay lit for about 30 seconds and then will start flashing red. The projector will not turn on. that usually means that the lamp it`s worn out, you may need to replace
...turns off after 30 seconds problem solution If you have Enabled Auto-Shut Off Option. This May Happen. Try Disable Auto Shut-Off Option. Clean the filters. This unit has two that must be removed and ...
Question about Sanyo Office Equipment & Supplies
...turns off can any one help please Had the exact same problem, after my projector was powered off upruptly. Turnedout all I had to do was push down slightly on the tempreturesensor/fuse (is opens the ...
Question about Sanyo Office Equipment & Supplies
...at all--air flow in and around the unit is critical. If the unit turns off after 10-30 seconds of use, it may well be a bad cooling fan either not running or not telling the main board it's ...
Question about Sanyo Office Equipment & Supplies
...turns itself back off. The lights go back to what they were before (Ready light is green and the Lamp light is red). Do you know what the issue is with the projector? I have a Sanyo XU35. Mine was ...
Question about Sanyo Office Equipment & Supplies
30 sec-1min my lamp will come on, but almost immediatly goes off. i thought it was the bulb, but apparently is not. The lamp replace light is on. Sounds like it is overheating. The light must be green
...XU35. Mine was starting up and showed a picture for about 15 - 30 seconds then shutting down. My lamp warning light was not coming on. When I put it in for repairs it turned out to be the lamp that ...
28 questions posted
Usually answered in minutes!
123 Questions
44 Questions
49 Questions
35 Questions
21 Questions