Sanyo PLC XP41 Multimedia Projector "2 warning light" Questions

...warning light would continue to flash red and the power light would be solid red. You should clean the air filters. The filters are located on the underside. Disconnect all cables and invert. remove ...

2. If anyone fan not working so please you check fans. (If lamp or lamp ballast unit faulty than after a time period the lamp indicator light ON not a warning indicator. I experience many times if any

...warning light Hi we have a new ( 2 week old) projector. When we turn it on the green light appears and it seems to be turning on. After about 15 seconds the warning light appears and it will not turn ...

...warning led it shutdown i have watched almost 2 movies on the projector. And in sudden the projector shut off by itself and give on top of the projector a Warning Red Light. I read the manual what to ...

...2 warning lights come on automatically. (Red bulb and overheating light) I turn it off and let it cool but when I turn it on the red lights come back on again almost immediately. I have replaced the ...

...warning lights come on, and it will restart after about 2-3 minutes. There's nothing in the book that addresses this issue. These projectors are mounted on a pole, upside down, about 30 feet off the ...

...warning message When you see this message, change the lamp as soon as possible. Make sure the projector has been cooled down for at least 30 minutes before changing the lamp Switch off the power to ...

...warning signs. now i am unable to power it back up. Not even a standby light. Is there a replacable fuse or something inside? Remove the six screws from the bottom and 2 screws in the back that hold ...

...warning signal for 2 weeks then above happened, menu shows fine, no input but all cables working......changed bulb......still get lamp warning and no input with red green blinking status light ...

...warning light turns on instead. i want cheap projector It sounds like the bulb is either blown or not properly seated. I already found out the problem.... Maybe the fan or cooling machine of the ...