Sharp Notevision PG-C30XU Multimedia Projector "overheats turns" Questions

...quickly (5 minutes) overheats. Lamp turns out. Is there a fix? clean all filter and do not block any ventilation slots with any objects and check .if the problem exist contact service center for

my cinego d1000 overheats 5 minutes after i turn it on overheats after five minutes Replace the heatsink and fan with a better one and make sure the proper amount of thermal paste is used (about 1 ...

optoma gt700 makes loud high pitched noise then overheats I have a one year old gt700 optoma projector. i turned it on tonight and it started making this awful high pitched noise like something ...

projector keeps turning off When i turn the projector on it only comes on four about a minute until the temp lights go amber and it turns off, the fan is working but the air coming out is a little ...

sanyo pcl-xu50 flashing red power light when i turn on my projector the light goes green it powers up for about 20 seconds then the power light changes to a red flashing one for about 10 seconds then ...

Last time I turned it off, the fan stayed on and I could not turn the projector back on. The fan stayed on for hours, so I unplugged the device. After I plugged it back in, the projector appears to be

i'm looking for the NEC NP3150 service manual. not the user manual. unit won't turn on due to overheat error code. isolated it to temperature sensor fail... not to true overheat issue... need to buy a

Thermal event and turn off There's a heat sensor inside the projector which will turn it off if it senses overheating of the bulb. Be sure the air vents are not blocked - there needs to be free air ...

light of projector is not working Try to turn off your projector and open it again after 10 minutes. The lamp may be malfunctioning due to overheat. This usually happens when your projector was not ...

won't turn on was working fine, then it powered off suddenly. All lights are completely off and it won't turn back on. I've checked the power source, everything is working fine. How long has it been ...