GoVideo Go Video DVD/VCR Combo "rf ch tv set" Questions

Ad

Question about GoVideo Televison & Video

1 Answer

CH 04). ?RF 03? or ?RF 04? appears on the front panel display. Solution 2 Cable Service With Cable Box If a cable box is required in your cable system, follow the instructions shown below. This hookup

Ad

Question about GoVideo Televison & Video

1 Answer

...RF output channel (CH 03 or CH 04). Turn the DVD+VCR off and then on Set the TV to channel 3 or 4 depending on the RF output channel you selected. Now you can watch the DVD+VCR playback on CH3 or CH4 ...

Ad

Question about Emerson Televison & Video

1 Answer

...ch 4 only, so I tried to follow that procedure again to reverse it in case it toggled. No luck. What do I do now, coach? 1) Set your TV to channel 3. 2) Insert a pre-recorded tape into this unit. 3) ...

Question about RCA Televison & Video

1 Answer

...RF connection from your basic directv to the tv,you would have to leave the TV on Ch.3 or Ch.4.to view the rest of the channels,you have to change it from the directv or dishnetwork box. You are NOT ...

Question about Cyberhome Televison & Video

1 Answer

...CH-DVD 300 player and the screen is pink... I don't know where I can get service. :-( is this a new player for you, some dvd will not wotk on HDTV and some you have to set up so they will if you have ...

Question about Toshiba Televison & Video

1 Answer

...Ch set up ,search the available channels either on the Cable (if you have ) or RF local channels thru Arial Antenna.. than you try to record again by carefully selecting ..you will record TV RF ...

...to the converter then to several VCR's and DVD players. Turn off the em-55, and the dot channels pass through the RF connectors.. Some DISH, cable direct TV receivers convert the signal to ch

Question about LG Televison & Video

1 Answer

...RF switch and the antennas in that (as it was a part of my nintendo). I had to tune it ATV manually on the TV setting not the LG player settings. When i did this is i kept flicking around settings ...

...[VIDEO/TV] on the remote control. ? If noise appears, change the RF output channel of the unit to CH 4 by pressing [VIDEO/TV] for 3 seconds. The RF output channel will alternate between CH3 and ...

Not finding what you are looking for?
GoVideo Go Video DVD/VCR Combo Logo

444 questions posted

Ask a Question

Usually answered in minutes!

Top GoVideo Televison & Video Experts

Marvin
Marvin

Level 3 Expert

85231 Answers

Ekse

Level 3 Expert

13434 Answers

 Grubhead
Grubhead

Level 3 Expert

5700 Answers

Are you a GoVideo Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...