...vhs cleaner thru it and it should help alot The tape deck will stop after a few seconds when it senses that the take-up spindle is not moving. Older units used a belt, yours probably has a clutch ...
...be the problem.Take it back! If you have this unit for awhile,two things: 1. You need a professional A/V repair guy to clean up and check your VCR head. 2. The rental VHS tape is dirty. Good
...stops playing after a few seconds and turns the unit off. Can anyone help. Thanks sounds like belts and rollers and any sensors you see need to be cleaned - it sounds like the unit thinks tape is at ...
vhs machine connected to line one or two and ta da it works great! Most commercial tapes have anti-copying feature imbedded in the signal. Often this is a kind of "burp" in the horizontal synch signal
...VHS tape the tape will play for a few seconds then stops. The display then shows " Err 1 ". Thank you It sounds like the sensor to tell the microcontroller that the tape is moving is not working. If ...
VHS tape stops playing after a few seconds Hi, Your concern indicates a probable fault in the take up spool (right side). Often this would be only a belt that requires replacement. In some instances, ...
...VHS Movie and play it for a few seconds, than stop it using the remote, then Eject with the remote, and then after removing the Tape, I pressed the Open/DVD button on the unit and now it worked, it ...
...tape film out of the roller areas where it is strewd out while it was being rewound so it is free, otherwise cut it. You will then have to pry the VHS up in the front through the entry door and push ...
10 questions posted
Usually answered in minutes!
727 Questions
631 Questions
405 Questions
415 Questions
357 Questions