Hitachi 61SWX10B 61" Rear Projection Television "grid pattern adjusting convergence" Questions

...pattern. The Red Convergence appears first by default. 5. Colored cross-hairs show the current adjustment position on the grid. To move the cross-hairs to a different position, use the CH+/- buttons ...

...grid pattern for the fine adjustment mode. I'm not sure about getting into Cursor mode or Data mode from the red CHK mode. thanks for your help Mike Jeff (I fix computers at Microsoft, and my dad was ...

...grid pattern on your TV and you have to move the cursor (using TV remote) and adjust each "point" so that each line is perfectly white. If you notice red or blue anywhere on that "line" then you have ...

...grid green pattern looking VERY geometrically even with only the red and blue lines off. On my set, the green base grid geometry is off/wavy. Are the IC's the correct fix? I was looking at the ...

...grid and the test pattern displayed simultaneously, so press 9 until both are on screen. it will be a crosshatch pattern overlaying your test image. use the joystick button (left or right) to roughly ...

...grid pattern on your TV and you have to move the curser (using TV remote) and adjust each "point" so that each line is perfectly white. If you notice red or blue anywhere on that "line" then you have ...

...grid pattern on your TV and you have to move the cursor (using TV remote) and adjust each "point" so that each line is perfectly white. If you notice red or blue anywhere on that "line" then you have ...

...grid pattern on your TV and you have to move the cursor (using TV remote) and adjust each "point" so that each line is perfectly white. If you notice red or blue anywhere on that "line" then you have ...

...pattern so it makes one grid of white lines.if a gun via the lense is out of adjustment because the set was moved,that is a different issue.on the side of each lense is a lock nut.loosen the nut and ...

...grid about 4 inch. on both the top and bottom, erratic pattern, although the rest of the line is fine. Also when the magic focus is pressed. it goes through all but on the red it stays at MA the ...