Hitachi 60EX01B 60" Rear Projection Television "convergence lines move tv" Questions

...lines.The tv convergence board the 2 STK convergence ICS and some or all it resistors are dead on the tv convergence board.These parts,must be replaced on the tv convergence board to solved the tv ...

...lines up. The top left quadrant has drooped so badly that they will not adjust back. The bottom right quadrant has drooped as well. Only on the red Projection TV sets need to have all three colors - ...

...convergence problems,it is dead.Tv have colors lines like R,G,B mis alignments,have colors pictures shadows or 3D pictures look alike?Yes,than the tv convergence board it is dead.The tv convergence ...

...lines to alignments any of them up.The tv convergence board must be replace like 2 STK convergence ICS and some or all of it resistors too.To fixed the tv convergence board to solved the tv ...

lines. Projection TV sets need to have all three colors - RED - BLUE - GREEN - lined up correctly on the screen in order for the video to look normal. When its out of alignment the video will look 3D,

...lines and distorted picture Projection TV sets need to have all three colors - RED - BLUE - GREEN - lined up correctly on the screen in order for the video to look normal. When its out of alignment ...

Convergence lines are SLANTED. Red line is above Hitachi 53'' Convergence lines are SLANTED. Red line is above horizontal center on left side on screen and below horizontal center on the right side of

CONVERGENCE IS OFF PINK AND GREEN LINES ON THE TV SCREEN Projection TV sets need to have all three colors - RED - BLUE - GREEN - lined up correctly on the screen in order for the video to look normal.

...convergence grid the blue and green grids were distorted and had multiple lines Projection TV sets need to have all three colors - RED - BLUE - GREEN - lined up correctly on the screen in order for ...

...convergence is locked w/wavy lines on the red tv has very low hrs the convergence for red wont adjust from its wavy lines if you try to move the right side of the grid up the left will go down and ...