Hitachi 50GX20B 50" Rear Projection Television "magic focus error code" Questions

magic focus error Hitachi 52 On my Hitachi 52'' TV the green is separated from the other colors and when we run magic focus it stops on green and then puts up a code 4. When we try to manually adjust ...

...magic focus? Mean ur tv convergence board it is dead,any codes error at all,mean the tv convergence board have components it is dead and the board it just dosen't conververt it three CRTS tv ...

...magic focus is on and it does the red it stops and an error code 5 comes up in the corner, while watching the tv there seems to be a red shade over images... my tv is the 51swx20b model, #5 comes up ...

...Magic focus stops on red and gives an error code 5. What could the problem be? FYI - When watching the tv, red is giving a ghost image. You have a bad convergence circuit, very common problem. A good ...

magic focus error Hitachi 51F500A On my Hitachi 51'' TV the green is separated from the other colors and when we run magic focus it stops on green and then puts up a code 4. When we try to manually ...

Magic Focus won't fix. Our screen has a 3D effect and there are red bows on the screen. Is there a manual convergence setting somewhere for us to try since the magic focus isn't correcting the problem

...magic focus Convergence is dead.Must replace the 2 convergence ICS,and some or all the resistors.Know how to solders?Buy a convergence kit at these websites at Tv Repair World.com,Tvrepairkit.com to ...

...i can give it a shot. What you think??? Thanks, Bryan Does the TV have a "Magic Focus? button on the front of the TV? If you try the magic focus does it complete or does it halt with an error

...magic focus and get an error code 5 on the screen after a long pause. i have pulled the convergence board and replaced the stk392-110 chips and i also noticed that resistor RK41 was toasted, so i ...

...Magic Focus button but did not do anything to correct the problem. Is this problem can be adjusted somehow or need to replace the convergence board? If I replace them, could you tell me where to buy ...