Hitachi Director's Series 65XWX20B 65" Rear Projection Television "tv color problems random" Questions

Color disappears from DLP display I've got a Samsung HL-S5087W 50" DLP tv, which is about 2 years old. It has recently started to have some issues with color display. Basically what happens is the ...

...tv usually if detects a fault will display via leds a error flash code. Refer to Owners manual for What the codes are for. If you go to Samsung Website Copy and paste link for manual. ...

tv's get very dirty and this may affect picture clarity, contrast, and perhaps color, including overheating of components. Make sure you have good airflow, clean filters, and a projection lamp that is

...problems, Tv was bought new about 2 years ago and problems started about 2 months ago. I now tv is still under warranty but just wondering if a solution is still available. thanks I also had a same ...

...TV turns itself off. It starts doing this almost two or three times a day which is quite annoying. I have read to a similar question that the cause are the tactile switches. Are you saying that it is ...

tv picture randomly flashes purple The mean your color circuit and video circuit has problem. Or your raster circuit some part is defective like capacitor corroded and change value of resistors. Labor

...color and bowing problems will occur and go away each time the TV turns on and off. I went in and unhooked the wire that controls the front buttons, so they no longer work, and I know the buttons are ...

...tv (about 4 years old). It has been perfect until last night. The screen now has a non definitive skwiggly line that randomly run thru about half picture. This has a color content to it. As the scene ...

...color goes back to normal. Ur tv have a problem call convergence,it dying about to be dead.The tv convergence board 2 STK Convergence ICS and some or all it resistors require changing to solved the ...

...TV image goes back and forth at random between a normal image and one where the red and green is off-set dramatically making the image look horrible. I tried resetting the convergence automatically, ...