Hitachi 57SWX20B 57" Rear Projection Television "convergence issue red blue match" Questions

RED ON THESE CROSSES YOU MIGHT KNOW WHAT I MEAN AND RESET FACTORY SETTING BUT IT DIDNT HELP . NOW GETTING WORSE ..HELP change the convergence ICs also check the resistors right next to the ICs as 1 or

...do it myself? Your set has a convergence problem which is a common issue. Take a look at this solution posted earlier on Fixya. It worked for me. ...

...convergence once more. if you experience the alignment issue after the five minute shutdown, this will confirm my diagnosis. If the convergence works after the shutdown, it will confirm that it was a ...

issue until the time you can purchase a new tv as the cost of the bulb and the technician needed to install it as they are wired to a circuit board and requires technical knowledge and tools hope this

...issue and will fix it until April It happens on these models 2003 Models: KF42WE610, KF50WE610, KF60WE610, KDF60XBR950, KDF70XBR950 2004 Models: KF42WE620, KF50WE620, KDF42WE655, KDF50WE655 They will ...

convergence IC issue is hitting a lot of older CRT-RPTVs (all manufacturers since similar ICs are used). There could be issues with the ICs, the resistors, cracked solder on the board, or all of these

...convergence problem may be.You will have to call a tech to get it repaired. Goodluck, Please don' forget to rate the solution This is a hardware side fault which needs service. The red CRT is getting ...

convergence IC issue is hitting a lot of older CRT-RPTVs (all manufacturers since similar ICs are used). There could be issues with the ICs, the resistors, cracked solder on the board, or all of these

...convergence problem After working fine for a few years, yesterday upon turning on the TV, the shows looked like they were being broadcast in 3D (my kids' assessment). They thought their favorite ...