Hitachi 61SDX01B 61" Rear Projection Television "projector remove cover" Questions

...blobs, wipe the lens with a dry, lint-free microfiber cloth. 6. Spray compressed air into your DLP projector to remove any lingering dust particles. 7. Close up the projector and reattach the

...projector and remove it by loosening the screws on it. 3. Use a proper screwdriver to loosen the screws which secure the lamp inside the projector. 4. Grasp the lamp by its wire handrail or handle ...

...Remove the movie projector light bulb or lamp. The bulb must be cool before you take it out. Use a tissue or cloth to remove the bulb because the glass bulb is very fragile. Do not throw away your ...

cleaning projectors How do I clean the projectors on Hitachi 50fx20b You dont it is a specialist job please take it to an autherised service center, it has high level UV from when turned on with ...

...remove the cover screen so that I can clean the projectors? thanks If you want to clean the projection lenses, you do not want to remove the cover screen to get there. That is the hard way, but you ...

The three projectors are not lit Posted by The three projectors are not lit Have a Hitachi 60SDX88B and does not turn on, front power red led is ON. Removed cover and check power supply led's (D919, ...

...Remove rear cover = clean RGB lens with soft cloth2)Remove front speaker grill cover and access panel Locate screen / focus block = adjust RGB focus controls3)Last,if needed, unlock each focus lens ...

...remove the back cover on a SAMSUNG HCR5245W, I need access to clean the mirror and projectors. Already removed all screws. The back cover appears to be made of two parts but I cannot split. From the ...

Remove the projector lamp. You can reach the color wheel without doing it, but you are less likely to damage the projector lamp if you take it out. Loosen the screws at the base: depending on your DLP

...Remove the projector lamp, it is located on the right side of the tv within the rear panel, to allow easy access to the color wheel. The remove the screws for the lamp housing and pull the handle ...