Canon imageRUNNER 1210 Copier "fixing unit error code e000" Questions

...error message! E000 is a fixing unit failure...either the thermistor or fixing lamp failed. Not sure about individual part replacement, most likely needs entire unit replaced....then reset the

fixing unit...thermofuse is broken or thermostart is out...to know this you must know how to open the fixing unit...and check the thermofuse and the thermostart with multitester...or see if the heater

...Fixing unit and reset code, it didn't fix the problem. I then installed a DC Controller and Fixing Heater Driver pcb and reset code. Still not fixed ... Installed a Composite Power Supply ... Still ...

...fixing unit. some call it fuser unit, you have faulty thermisters or thermo fuse, you can try to reset the error code but if it comes back you may need to replace those parts or just get a new fixing ...

...help. A E000-0320 code is a fixing unit error code. It is either not warming up or it is getting to hot. It is a thermister is shortting out or a thermal fuse or one of the heating lamps are

IR4570 error code E000 - 0024, please help hai my name is aslam the error code E000 has been fixing unit.replace the unit

...fixing unit...if you can take out the fixing unit...see if the thermo fuse and thermo start inside the fixing unit not broken you must use a multi tester to check that...check also the wirings from ...

...E000 Here is what Canon says about the error code: Solution: Reset the unit-IC D/PC 1000 Series Reset the unit Slide the platen to the left. Slide the platen back to the right until it locks in

code E000 E000 What model of canon copier do you have? E000 error code means that there is a problem with the Fixing Unit...Either it overheated or did not warm up properly.

...fixing unit at power-on. the one pointing to 0081 is: p-sens-p when value of this position is lower than 255 it will indicate an error code: E020-0081. you can check it in service mode which you can ...