Canon imageRUNNER 8500 Copier "pull second tray" Questions

misfeed can't find sensor for cleaning. always misfeed second tray sensor. Pull out the first tray and the second tray.The sensors located on the paper feed roller assy.

...pull from the highest numbered tray that matches the paper type, so that your printer used to pull from 2 first and 3 second tells me that both trays are likley not configured for the same

...second tray and not the one on the main body. Pull tray 1 and 2 out completely and make sure there is no paper stuck in the machine behind where the tray goes. Double check that both side doors are ...

...tray 2 jam - starts printing on one chq form but for some reason a second form gets pulled thru behind and jam occurs. Now there is an error message that 'Tray 2 Missing' but it is in ...

...pull the rollers down, but they spring right back up. on tray 1 the rollers touch the paper, it touches the tray according to he size needed so if u want in the second tray can keep the size greater ...

on the tray.. I would assume you mean the second tray, you should be able to just pull it out... Do you have the instructions??? they can be found here if you dont'. Check page 41 for loading trays..

...pull out all paper trays. Reset machine leaving alll trays OPEN. Close the trays 1 at a time waiting 30 seconds between each tray closing. If the code comes back after closing a tray then that will ...

...tray shut, pull the tray open and try again. If this does not solve the problem, open the printer doors and take a look inside the printer. There might be something small impeding the paper's smooth ...

...second window (seriously) to remove the waist tray the printer will lock the tray by dropping a small plastic arm (which can break if you pull on it too hard). However, the small plastic arm is ...

...tray 2 or 3 is empty,make sure that you have enough paper in the trays and secondly make sure that you have there is no paper jam in paper roller, even an tiny particle of paper can cause this error. ...