...fuser door open. We have tried all of the suggestions. Thanks If the back door is shut and the fuser seems in place you need to replace the High Voltage Power Supply. The fuser door switch is part of ...
...fuser and shut the covers. Failing this there is a push switch that is activated when the front door and left hand door is shut. Sometimes the screw holding the cover on comes loose and causes the ...
Question about Canon Office Equipment & Supplies
...fuser door on a xerox fax machine 3300 mfp Error message on the xerox phaser 3300mfpv/x fax machine says the fuser door is open. Where is the fuser door? The fuser door is at the back of the machine. ...
door display work but there is no error code It sounds like there is a problem with the fuser unit, although am not sure why there is no error code. In the fuser unit, check the thermal fuse to see if
...fuser door is located on the back of the machine. If that door is shut but you are still receiving this error, you should replace the High Voltage Power Supply because the fuser door sensor is a part ...
Fuser door open turn off printer pull out fuser unit turn on printer and turn off printer again replace fuser unit back and turn on the printer Hey, make sure the rear door is shut, if it is, you most
...fuser door Hey the fuser door is the large door in the back of the machine, make sure the rear door is shut, if it is, you most likely need to replace the High Voltage Power Supply (Part# WH773). ...
...fuser door open", even when the door is closed. I have removed the fuser and turned the machine on and off a few times - same error message. I put the fuser back in, and same message. Any ideas? ...
...door, jam in fuser (hot bit) Double check no paper is wraped around fuser rollers. These machines have a fuser at rear if you look at he fuser from the back, on it you will see, two thick fuser ...
door it say fuser unit setting error Most common problem is the electrical connector on the fusing unit or the connector that the fusing unit connects to inside the machine is broken. So when you push
467 questions posted
Usually answered in minutes!
2,244 Questions
2,149 Questions
1,862 Questions
1,594 Questions
1,302 Questions