...When the same error repeatedly occurs after several times of turning the power OFF/ON, execute the following remedies. (1) Replace the Laser Scanner Unit. (2) Replace the Engine Controller
Question about Canon Office Equipment & Supplies
...Laser/Scanner unit failure. check 1) Turn the power off and on. 2) Make sure that the Laser/Scanner unit and DCNT board are properly connected. 3) Make sure that the Laser/Scanner unit and DCNT board ...
Laser scanner unit error. Turn off the printer, and then turn it on again. If the same error occurs, turn off the printer, then contact the store you purchased the printer, or a service representative
...laser scanner unit EEPROM data. theres a good chance that what is needed here is the laser scanner unit has a Beam Detect mirror and sensor and after time gets coated with foreign particles(dust) ...
...Laser scanner motor error. The polygon motor does not deliver a synchronous output (L) within the predetermined period of time. The scanner unit may need cleaning. be careful as there is a laser ...
...PCB normal? NO : Correct the connection. 3) Laser/scanner unit, DC controller PCB Try replacing the laser/scanner unit. Is the fault corrected? YES : End. NO : Replace the DC controller PCB. Good ...
laser scanner unit is faulty. The DC controller PCB is faulty. Remedy 1. BD PCB Try replacing the BD PCB. Is the problem corrected? YES: End. 2. Laser scanner unit, DC controller PCB Try replacing the
Laser Scanner Unit. The laser scanner functions to image onto the drum in the copier. It scans at a high rate of spped, the error indicates it is in trouble. The Laser scanner would need to be changed
Question about Canon Office Equipment & Supplies
...laser scanner motor reaches constant speed state. Causes - The laser scanner motor is faulty. The DC controller PCB is faulty. Remedy 1. Laser scanner unit, DC controller PCB Try replacing the laser ...
176 questions posted
Usually answered in minutes!
2,244 Questions
2,149 Questions
1,862 Questions
1,594 Questions
1,302 Questions