Canon P23-DH Calculator "paper feeding evenly" Questions

...paper feeding through once you have partially fed it into the teeth, gently tap the paper feed button. Once or twice should do it. (The button is located on the far top left of the control panel, ...

...in and it seems to be jammed keep getting an E on screen cut the paper evenly with scissors before attempting to feed it into the paper entry port. If you just rip it, it will jam or fail to

paper feed paper roll consistently "sticks" and will not move even by using "feed" and imprints over previous numbers If the print-out is an 'alien-like' one, the problem is on the sensor of the ...

feeding the paper through the back of the machine (the slot is located on the outside of the back of the machine), the paper naturally wanted to enter underneath the black plastic plate where it would

...Tape evenly to the end of the paper roll and put into the ****, pushing gently in and at the same time pressing the 'Feed" button. It will immediately feed since it is firmer than the Poat-it

Loading paper First time user. Cannot load the paper. Have tried all suggestions to date. Nothing works. Paper does not advance even though machine is trying to do so. Paper goes through slot at rear ...

My calculator refuses tocatch a new roll of paper to feed through. Try folding the paper over at a 45° angle and feed it in. The 45 degree paper fold did the trick...you need to feed horizontal ...

...Paper feeding Hi. I have lost my manual and cannot figure out why the paper is not feeding as it calculates. Also It has been a while since I used the register and cannot remember how to even thread ...

...Argh! I have read past posts on other calculators and see the slot in the back, try to feed the paper in, stick it in between the fine silver slot and pressing the advance button, #sign (there is ...