JVC KT-SR1000 SIRIUS Radio Receiver "1000" Questions

JVC KT-SR 1000 and KT-SR 2000 Will the same docking station work for both unit the KT-SR 1000 and KT-SR 2000? I have a 2000 and it went out and have found a 1000 that looks the same but not to ...

PACE MSS 1000 i AM JUST ABOUT TO GET MY OLD PACE MSS 1000 WIRED TO RUN AGAIN AND WOULD LIKE HELP WITH THE WIRING INSTRUCTIONS FROM THE DISH AND MAINS ETS TO GIVE TO MY ELECTRICIAN mANY THANKS You will

...for the smart card to be put in? i have same problem not working Same problem. mines a eurovox 1000 sl P in leeds go to http://www.bigmaq.co.uk/ download the latest firmware its there ive seen

...get surface mount pads to hot know how to solder get the iron fully up before hitting it 1 1000 2 1000 done put it this way if you can see the unit has been too disturbed youll need more ...

...melt (it will turn shiny). Let it cool for 5 minutes afterwards. You can use a heat gun (set to 1000 degrees F) that can be purchased at a hardware store. This has a 50% success rate. The problem ...

I just purchased an Airwave AT-1000 headset model and I cannot even get it turned on. If you have followed the instructions explicitly - the unit could be faulty.. I would suggest bringing it back for

...can leave the radio in the housing). - If you choose to go with the heatgun method: set the gun to 1000 degrees F and move it back and forth over the PCB until the solder turns shiny. Let it sit for ...

...radio. Reflowing is easy, just remove the circuit board from the plastics and heat it up to 800-1000 degrees F with a heat gun. Let it cool and reassemble. I fixed my on ebay. ...

Terk XMD 1000 need power coed Where can i get a power cord for this unit, or can I make one? You can make one if you have the 4 pin white nylon connector. You only need 3 pins, one to 12volts for ...