JVC HD-52G786 52" Rear Projection HDTV "enter service menu" Questions

Enter + Menu + Standby to turn on..you will get the service menu on screen. Just alter the sequence of info + enter + menu to info + menu + enter or something. hope it works regards bhavin turn the TV

enter the service menu to adjust the convergence. My sp43w6hpx needs the red pulled back in any one help with service manual I have the same problem and my one went off last night. go to the menu then

...enter the Service Menu. Select 2 for Self Check. Then turn the TV off, and after the fan turns off, unplug the power cord. Reconnect the power cord, turn the TV on, and the HDMI port is re-enabled. ...

...enter service menu Service menu for any sony will be by pressing and releasing the next keys: Display, 5, Vol+, them power on. The TV must be off while you do This, be carefull to change some values, ...

...enter into its service menu. I'll give you the procedure to enter into its service menu. you have to done all the other settings. There are so many settings should be done after this, and it is ...

...Set (the TV should go back to the main Service Menu, continue holding Enter) and now also hold down the MUTE button on your REMOTE CONTROL. After about 5 seconds, your Lamp Life Counter should pop

...with adjustments, press ENTER to save Press MENU twice to exit service mode Hope this helps. You should look for the vertical height or size adjustment. Do not adjust anything you don't know

...service menu Anyone know the correct entry code, for entering the service menu on my sharp dlp ,threw the remote Hold menu & vol+ (for 3sec) opens the lamp counter reset menu on Sharp DLP press OK to ...

Service Menu How do i the following menu: "OPTION MENU "MENU 0170" SERVICE MENU" on my Mitsubishi HD1080 OPTION MENU "MENU 0170" SERVICE MENU "MENU 0157" CONVERGENCE MENU "MENU 0159, 4 FINE, 5 COARSE,

...Enter Service Menu for convergence it will tell you which numbers control which colors to move up and down to complete alinement for convergences. You must have your hand unit the one that came with ...