...mount stand and take off the 2 panels on the back of the t.v.. One will be in the middle use a flat head screwdriver and lift upwards on the side nearest to the screw, the other on will be in the top ...
...screw hole. The problem was it was screwed down in such a way that one of the connections going to the main board was not making it's proper connection. So I just gave it a little push towards the ...
pushed the heatsink on the the chip, and the picture stayed perfect now for 2 days. I think the heatsink will eventually need to be re-glued on with thermal expoy glue. It will be a pain to remove and
...hole so it can push through). 6, When both terminals are through, bend them slightly so it stays in place. Take the solder and stretch out a few inches off the roll and while holding it in one hand, ...
...mount 32 inch Emerson flat screen? I don't know, but you can figure it out. It's a sure bet that it's a metric thread. 6mm would probably be a good guess. Could be 8mm also. They're likely fine pitch ...
...mount the tv on my wall Lay down the tv picture screen on a soft flat surface.Check all the screws holes and take out all the screws.Take ur hand holding on to the tv and base stand tight.Pushes in ...
58 questions posted
Usually answered in minutes!
210 Questions
52 Questions
25 Questions
30 Questions
31 Questions