JVC AV-30W475 30" TV "power supply amps current" Questions

Ad

Question about Toshiba Televison & Video

1 Answer

...diodes iii fusable resistors near the power transistor iv making sure that a 90-110volts is getting out of the power supply to a line transistor, near the line trasformer. the problem will be ...

Ad

Question about Samsung Televison & Video

1 Answer

...power supply], leaky Capacitor [large metal type for heavy voltage\current], bad or value changed bias for SCR transistor, value changed filter resistor and loose transformer[Xformer] that the coils ...

Ad

Question about JVC Televison & Video

1 Answer

...light on what is causing the buzzing? Thanks so much to whomever can help! Check filtr capacitor in power unit. Check filter capacitor on supply to audio amp ic. or Amp ic itself is defective. ...

Question about Sony Televison & Video

1 Answer

...power supply circuit that is faulty, for some reason or another it blew and not allowing the current to flow like it is supposed to, what i would suggest if you have someone handy around or you is to ...

Question about Sony Televison & Video

1 Answer

...power supply of any of the circuits.Three blinks - B+ over voltage protection (OVP), unit goes to the standby mode then displays the 3 blink fault. This is also a problem in the power supply ...

Question about Toshiba Televison & Video

1 Answer

...power supply DC output connectors first. http://assets.shopjimmy.com/media/catalog/product/cache/1/image/5e06319eda06f020e43594a9c230972d/f/s/fsp1884f05.jpg Please read my guide to get some ...

Question about Sony Televison & Video

1 Answer

power supply of any of the circuits. Three blinks - B+ over voltage protection (OVP), unit goes to the standby mode then displays the 3 blink fault. This is also a problem in the power supply circuit,

Question about Sony Televison & Video

1 Answer

power supply of any of the circuits. Three blinks - B+ over voltage protection (OVP), unit goes to the standby mode then displays the 3 blink fault. This is also a problem in the power supply circuit,

...power supply is stopped 5 Blinks Diagnostic Item Description: IK (AKB) Probable cause: Video OUT (IC545) is faulty. (A Board) IC001 is faulty. (A Board) Screen (G2) is improperly adjusted. Detected ...

Question about Mitsubishi Televison & Video

1 Answer

...LIMITERS 1 OHM OR SOLIDER IN FUSES FOR + & - SUPPLY THEY FEED THE CONVERGENCE IC'S YOU NEED TO VERIFY YOU HAVE YOUR POWER SOURCE TO THESE. ALSO A LOSS OF VERTICAL DEFLECTION WILL CAUSE

Not finding what you are looking for?
JVC AV-30W475 30" TV Logo

12 questions posted

Ask a Question

Usually answered in minutes!

Top JVC Televison & Video Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

matt martin
matt martin

Level 3 Expert

1259 Answers

 Grubhead
Grubhead

Level 3 Expert

5755 Answers

Are you a JVC Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...