...cassette carriage out. Fix-it tells me that I need to do this to get the tape out but the directions are for a VG4259. another way to eject tape is to turn the eject motor by hand in the direction ...
...(and back) screws holding the cover on the VCR, then carefully pull the tape out from the spindles and physically remove the cassette. Your VCR may need to be fixed or replaced if it happens
...cassette tape which appears to have broken inside the tape. Am I able to repair this? If so, where can I get this done? I'm afraid that this is one that only you can do, or somebody you know. ...
...tape but the unit still powers down and flashes the number 2 on the front panel.....what's wrong? Can it be fixed or should I just go ahead and retire it? I'm not sure if this is a solution, but it ...
...cassette load\unload motor and the other is the tape sensors cable once you pull the cover they are very small phillips head screws: you NEED a very good, long, small Magnetic tip screwdriver. Tthere ...
...fix broken vhs tapes If the problem is the shell of the cassette that is broken, simply buy a new blank VHS tape and remove carefully the screws underneath it. You can then take out the old tape and ...
...cassette can vary in speed depending on how much tape is on it. After a few years, it slips too much and can't pull the tape in fast enough. (older units use rubber idler wheels to do the same thing) ...
...tape, unplug machine, put the screws back into the top cover, declare the job done. All it will cost you at this stage would be the methylated spirit/alcohol cleaner, and special flat swabs. If you ...
27 questions posted
Usually answered in minutes!
443 Questions
354 Questions
208 Questions
175 Questions
149 Questions