...position so you can return to it if the adjustment doesnt help. You make a tiny adjustment and try a disc....then repeat. Small adjustments are all thats needed!!! If you arn't sure what your doing ...
...adjustment, set that to zero as well. 3) At this point the tone-arm should be totally weightless, and should neither touch the plater nor swing up/down by itself. It should float halfway. 4) A this ...
...Placement of the speakers relative to the room surfaces and the listening position can affect their perceived bass response. Experiment. Corners and close wall reinforce the ...
...Just plug the wire into the middle of the connector on the back or the receiver. Adjust the position of the wire till you get a good
Question about Sanyo Audio Players & Recorders
a disk. If not working, a little bit more. Finally you'll get the exact point. Mark the initial position so that you can reverse what you've done in case of not working
...adjustment to the position of the potentiometer, then try the CD player and see if it is improved. In my experience generally only small adjustments (less than plus/minus 30 degrees of rotation) are ...
Question about Aiwa Audio Players & Recorders
...adjustment to the position of the potentiometer, then try the CD player and see if it is improved. In my experience generally only small adjustments (less than plus/minus 30 degrees of rotation) are ...
...two days and I can't get it right. In most cases the mid will give the full sound, from that position you can tweak it slightly up to bring out more bass, middle tones, and
Question about Audio Players & Recorders
...Wise (CW) just a small amount. Than tried turning it Counter Clock Wise (CCW) back to original position and past (CCW) a small about. I typo-ed that. Any way make small adjustments +/- from ...
15 questions posted
Usually answered in minutes!
122 Questions
52 Questions
65 Questions
48 Questions
61 Questions