LG RU-44SZ51D 44" Rear Projection HDTV-Ready Television "reset bulb lamp" Questions

...bulb is installed properly and that the image looks crisp. 3. Reset the lamp time counter. Each Toshiba TV comes with a lamp hour meter stored in its software. If you do not reset the lamp timer, the ...

...reset or do I have a 2nd bad bulb? Have you reseted the lamp timer of your tv? if not, you should do it, because it's just adding more and more hours to it to the ones it already had and it's ...

...reset the lamp life timer. how to reset timer on lamp The file is too large to post here but if you post your email address, I can send you the step by step instructions to replace the lamp and reset ...

...reset lamp meter i have pt-52lcx66 panasonic and put new bulb in it dont no how 2 rest lamp mter I have a PT-50LCX63 unit. After 5 years and 4 bulbs, a "reset lamp" warning showed up every time I ...

...reset on the bulb or how many hours are currently on it. So to be honest I dont know if the unit accepted the reset command or not. But what I do know is I'm not planning on buying a new bulb every ...

...do I reset lamp timer. I just replaced a bulb? Lamp light continues to blink after replacement. Bulb type is correct. check through the menu for lamp reset or consult the owners manual for

...Reset Bulb is most likely OK. Original bulb in Sony TV is Philips, label on bulb usually says Philips. Sony don't make bulbs. Sony Cost is usually 1.5 times other sources. Many shopping cart ...

...reset the light?? anyone else have the light stay on after bulb replacement So far I have entered the service menu (both menus together) then selected Lamp Replace (option 14) and then pres ok to ...

...reset the hours meter and wait for the bulb to go out or go ahead and change the bulb? Thanks in advance for any help. Mark Lamp Time Reset Procedure: Be sure to reset the Lamp time to "0" after ...

...reset the bulb timer, as is reqiuired. To reset, you're supposed to hold the "Menu" and "Vol +" keys at the same time. Anyway, the unit is shut down, and now flashes a 3-2 code - meaning a bulb ...