LG RU-52SZ51D 52" Rear Projection HDTV-Ready Television "board dlp" Questions

board and DLP chip. The BGA connection which connects the DLP chip to the board, or the flex connector may be bad, causing the row and column section to not activate the micro-mirrors on the DLP chip.

dlp chip the problem is in the DMD Board is it something like this? usually this happens to Samsung DLP... here is a link where you can find a DMD Board Good luck you will need your part number http:/

...can I ream out screw holes Can I ream out the screw holes on the formatter board so I can adjust it Some ideas. on this link DLP TV Repair Tutorial Picture Off Center DMD Board Formatter

...dlp television I need a 31419pn012a board. Any help with diagnosis would be appreciated. I will pay for services. Thanks TV Parts Universal TV Stands DLP Chips ShopJimmy They have parts and a board ...

...DLP tv due to bad Digital Micromiror Device , or bad DMD board . What is actually the problem is the DMV chip connected to this board . Inside this chip are 3 million tiny mirrors ,and when they ...

...DLP board. Moreover experience is a must to do work with this TV. As far as lamp il ON, there is no fault to its power supply board. The fault lied in the main board itself. If you are aware in ...

...dlp. what causes this? If the white spots are appearing in different spots or "Moving" it is the DMD board beginning to fail. Samsung DLPs seem to have a lot of DMD board failures. I would expect it ...

...board, and the back of the DLP chip can be clearly seen. The heat sensor that regulates the fans for the DLP chip is the small black square located on the DMD board just slightly up and to the right ...

...DLP md5020n TV. I need a new Lamp BALLAST board. Where can I get one? I have two good lamps. I just need the ballast board

samsung dlp green tint digital video board hey there it sounds like you may have a problem with the color wheel or a DMD board most likely just the color wheel going bad