Magic Sing Along Consumer Microphone "power" Questions

On the CAD GXL2200SP Where is the the power switch for the mic located at? Im not getting anything i have the phantom power and everything plugged up right. But i knw there has to be a power switch ...

no power no lights on I assume no power no lights on amplifier> in any event check ensure power switch is on and connected to a reliable power source. If fused check fuses or ov relays. If this is ...

I have the CAD ST100 microphone i need to know the power to supply this and pin outs. The ST 100 microphone is a phantom powered unit. So, it receives its power by the same terminals used for its ...

my U87 microphone won't power up...no signal. does anyone know why this may be happening? Was it working fine before it stopped powering up? The U87 is a condenser microphone so maybe the reason it is

Best place to get Cad E 200 repaired in New York or elsewhere Mic will not stay powered up When the power switch is activated it will register on the console but will not stay powered Hi, first check ...

(need more tracks) dp01 So the mixer i need would have to be a non powered unit, right? I'm guessing that you're asking whether the mixer needs phantom power to the mics in which case the answer is ...

Tascam DP-02 I have the DP-02 i get a error messages ( S reset err: 12 please power down ) when it is booting up. does anyone know how to fix this problem is there some firmware software i can downlod

...g2 receiver passes major static to mixer When the receiver is plugged into a mixer with its phantom power turned on, this unit produces major static on the channel; as soon as the phantom power is ...

Tascam DP01 CD/FX I get a message when I switch on 'SReset: Err12. Power Off'..what do I do now? Sounds like the machine may be looking for a disc, but nothing ejects, nothing works. This is basically

Phantom Power Not working through K6 Hello. My sennheiser k6 power unit works fine with a battery, but won't conduct phantom power through it. I've tried different XLRs, made sure my ME66 works on a ...