Marantz SR-5000 "power light receiver" Questions

light,no power receiver standby light comes on but receiver never fully operational. WOOHOO!! I fixed this issue... same problem as everyone else has mentioned... to reset the Kenwood VR-606 receiver,

...light constantly lit. Tried unplugging the power cord (not the other cables attached to powered units) and light remains red. Solutions? bbkaufman If the light is staying on after you unplug the AC ...

...power light i have a blinking red power light on my receiver. I have already tried to unplug and cool down the unit but when it powers up I get the green light for a few seconds and then blinking red ...

...power on and the volume light lights up, then the power goes back off. Your receiver has developed an internal short circuit and the unit is shutting down to prevent further damage. You might want to ...

...power light bbut no output. Is there a way to reset this model?? Thanks Unplug from power socket for few hours,most likely had a surge from storm and destroyed,either way will need to be serviced to ...

NO POWER TO RECEIVER /NO LIGHTS FRONT PANEL NO POWER TO RECEIVER//FRONT PANEL NO LIGHTS check power supply.

receiver won't turn on? no light nothing! Check the fuse inside the unit. If there is no power lights, the power supply may be bad - the fuse is located in the power supply. Check you wall outlet, too

...power and no stand-by light, it may need a stand-by power transformer or the main micro. If the stand-by light is on and the receiver clicks when you push the power button it may only need a fuse. ...

...power light blinking on my denon avr 1907, tried reset procedure, no speakers hooked up now and it still goes from green light to blinking red light and shuts off...Any clues? This is a protection ...

...power-up, no light on the front panel glass. Thought the control chip might be locked up so tried the old push power button the same time as pushing the CD button. No response.(I had an older sv414 ...