Marantz SR-5200 Receiver "clean volume knob" Questions

...volume knob on receiver not working. When I try to turn the volume knob up or down, it bounces all over the place. Any help? It sounds like the volume control pod has gone bad and needs replaced (The ...

...contacts may help. The volume knob should pull off. Once its off use a non-flammable contact cleaning spray to clean the contacts behind the knob. Electronics and automotive stores should have

volume knob doesn't work. When I turn volume down, it goes up. Internal volume switch broken (if somebody hit the knob )or jut need cleaning.

apply it over volume and move it forward and backward many times. I had this problem and needed to remove and dis-assemble the volume control and clean it with tuner cleaner. After that it worked fine

...between volume buttom and its knob. Try to carefully pull out the volume buttom from the unit and then clean its internal part with some neutral lubricant as well as the knob where it it is

...CLEAN / LUBRICATEthe volume control know with a CONTACT/CONTROL cleaner, I use a product from Radio Shack, this works wonders on drum type electo mechanical devices which are basically volume control ...

...volume knob had malfunctioned and that it is pretty common. If you can find a replacement part, replace it. it's possible that the sliding carbon has worn out It has a rotary encoder, not a carbon ...

...volume knob is either very dirty or needs replaced! (If you remove knob you will see the shaft of the volume pod go into the pod itself) You may try cleaning with a can of high pressure air by ...

...prevent sudden turn of volume. if i were the repairman i can simply clean the contacts of the volume control and pour silicon oil again. but i really dont know in your area if they try to clean

clean inside of the volume controller (also known as Encoder). Be very carefull not to bend the small fingers located inside the unit. Sometimes there are some gowee stuff inside that is hard to clean