Metrologic Instruments MS5145 Handheld "reset wedge keyboard" Questions

wedge emulation. hope this helps Pete I found a solution. The scanners needed to be reset to default. (via the manual) Thx anyway. Didn't know they could be configured for use without a kboard... That

...reset to default wedge values. If that doesn't work, I'd procede to sc an "CF" for PC=AT,PS/2. Pages 36 & 37 address the Caps Lock issue, where the scanned value is in the wrong upper or lower case. ...

reset the battery. Voila!!!! Sucess!!!! If your scanner's keyboard wedge connection is recognized (a little popup window will say that it is a Symbol barcode scanner and that it is installed and ready

reset the battery. Voila!!!! Sucess!!!! If your scanner's keyboard wedge connection is recognized (a little popup window will say that it is a Symbol barcode scanner and that it is installed and ready

...reset bar codes available that could fix this problem? The LS2106 did not support laptop mode so the PS/2 wedge needs to have a PS/2 keyboard attached to the cable. If that does not work I would ...

...wedge not scanning correctly? It works on one computer completly fine, but not on others. It writes random characters and their quantity. After restarting computer, it scans 2 times ok and then ...

Wedge or RS232, you'll be fine. If it is IBM46XX, USB (standard/low speed), or USB (full-speed USB/FSUSB), you will have to do a little more configuration and I will go over that at the end. After you