Nakamichi AV-10 Receiver "popping noise audio changing channel" Questions

...popping noise and they said that that's normal when you change channels that are digital. They don't seem to think that it's a defect. It is not normally for you AVR to do this but Onkyos have this ...

channel. No noise comes from this channel when played, The speaker works fine on other amps and other channels. no speaker will work on that channel, it is dead. Hello.I know the post is old but i had

...noise does not go away when I change the TV channels, but it does go away when I play DVDs. When I play DVDs it is like it used to be with no popping noises at all. Can you help? Also, don't know if ...

...noise does not go away when I change the TV channels, but it does go away when I play DVDs. When I play DVDs it is like it used to be with no popping noises at all. Can you help? Also, don't know if ...

Noise and popping on Sony STR-DA3ES No problem on this unit since it was new. Tonight it started some strange behavior. When ever the sound input changes, like from menu to main movie there is a loud ...

...POPPING" noise-it will however leave you with unbearable static which in turn should cause you to lower volume momentarily eliminating the need to constantly turn off the receiver. Thank for asking ...

audio is not being muted. This is a theory of why the noise is not on the main speakers, but present on the sub woofer. Because the switching noise is of very low frequency, this is why the sub woofer

...noise and it takes about 6 seconds. Do I need an optical cable for the PS3 too? Have I wired it up wrong or got some settings wrong? Your connections are fine the issue here is with the onboard ...

changing it from one side to another, than check the speaker. 3.Check your earth (negative leads) on your speakers.. you may not be grounding them properly. If the car noise u hear goes along with the