Allen & Heath Xone-22 2 Channel Dj Mixer "getting channels cable" Questions

Ad

Question about Mackie Music

2 Answers

channels USING a TRS balanced cable. Page 28 of your user manual shows the block diagram and signal flow diagram. The trim control is the input gain control. Start with those say at 12 o'clock and

Ad

...mixer or get two RCA to 1/4 inch adapters. Crank the pan controls clear to the left on those two channels. Run a cable from the 1202 left main out to your speaker input. Adjust the controls as

Ad

Question about Behringer Music

1 Answer

hum on channel 2. I assume that the hum exists without any cables plugged into the input. If that is not the case, then make sure all input cables and source are using BALANCED lines. If the hum is ...

...channels. http://elektrotanya.com/behringer_ub2442fx-pro_sm.pdf/download.html Scroll down to "get manual" and click to download. Ignore other download links. By looking at the signal paths, you can ...

...channels. also. my amp has to be in channel 2 position (with the button on the head) before i can use the footswitch. sometimes the input/footswitch jack wears out and you need to bend the internal ...

Question about Mackie Music

1 Answer

hi, my makie 1604 vlz channels are tempermental in that sometimes they work and sometimes they dont. what can i do? There are cables that bridge the sets of channels together. You MAY have a bad ...

cable with 1/4" mono phone plugs on both ends (like an electric guitar would use) from the device to one of the channels on the Peavey. Bring the volume up on both the channel and master on the amp up

hi i have 2x ev sx300 speakers (speakon) and 2x peavey es 315 (1/4 jack) can i daisy chain the ev's from channel a and the peavey's from channel B (all speakers are 8 ohm). Also should speakon

I'm using an external reverb (T.C. Electronics Nova) through the effects loop and I can only get verb out of one channel (left I think) and in fact it seems that the "stereo" section (knobs etc.) have

Question about Behringer Music

1 Answer

cable (balanced) and connects to the XLR input connectors. If you have 1/4 inch jack cables that aren't TRS balanced on the mics, get rid of them and get XLR's. Then push the PFL button down (LED will

Not finding what you are looking for?
Allen & Heath Xone-22 2 Channel Dj Mixer Logo

8 questions posted

Ask a Question

Usually answered in minutes!

Top Allen & Heath Music Experts

Don A
Don A

Level 3 Expert

4390 Answers

Steve Pack
Steve Pack

Level 3 Expert

7121 Answers

ADMIN Eric
ADMIN Eric

Level 3 Expert

39359 Answers

Are you an Allen & Heath Music Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...