Allen & Heath Xone-22 2 Channel Dj Mixer "cables" Questions

Ad

...CT100...X Pattern on LED grid when testing a mono instrument cable I'm testing guitar cables, and I get an X pattern for each. I've tested 3 cables. Cable 1 has shown occasional ...

Ad

Question about Ibanez Music

1 Answer

...into the IN jack. Pushed the pedal, no light, no sound nothing. Oddly enough when I reversed the cables (opposite of Instructions) The RED light did come on but still no sound. Any thoughts? The ...

Ad

How to fix 13 pin cable for GK-2A.... i have 13 pin cable for GK-2A and i try to cut in a half then i soldered again, there is a signal when i play the Gr-30 when i tune my guitar but the problem is ...

Question about Line 6 Music

1 Answer

...alone causes the oscillation, I would certainly question the QUALITY of that cable. Poorly sheilded cables can pick up ground loops. If you short the contacts of the cable at the guitar end and that ...

...on it. Now it wont read the floppy disks...any suggestions It is VERY easy to not have gotten the cables back and seated completely for the floppy disk. ALSO it is very easy to damage the ribbon ...

...a Beringher CT100 cable tester and I'm a little confused with a reading im getting from acouple of cables, Im getting an X pattern on the LED grid when testing some xlr cables... What does this

Question about Ibanez Music

1 Answer

sound is breaking up I bought a used ibanez electric uitar for the kids.it looks like new, but the sound is breaking up. i suspect the cheap cable i got with it..the jack output looks like new, but ...

Question about Behringer Music

1 Answer

...of the cable in and there are indicators showing condition. HOWEVER: I recently found 6 brand new cables that resulted in HUM from mics. These cables had a pair of wires reversed at BOTH ends and ...

...plugged in, the amp is OK. You need to do some swapping out of cable, amp and guitar with other cables, amps and guitars. Zero in on it by the process of elimination. I've played for 50 years,

just got my fender 63 reverb reissue unit...and when i switch it on all i get is a loud buzzing hum type sound . If you unplug the guitar cable and STILL get the hum, the unit has a defect... return ...

Not finding what you are looking for?
Allen & Heath Xone-22 2 Channel Dj Mixer Logo

8 questions posted

Ask a Question

Usually answered in minutes!

Top Allen & Heath Music Experts

The Knight
The Knight

Level 3 Expert

76466 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Brad Brown

Level 3 Expert

18563 Answers

Are you an Allen & Heath Music Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...