Behringer Ultra Di-100 Active Direct Box Stage Di "preamp mixer" Questions

...a Mackie 2404-vlz mixer Upon opening the mixer, you might find that the preamp boards aresimilar , use the running board as a guide in troubleshooting .On most are the XLR inputs with phantom

please can you tell me the difference? Dear Fixya ..... please can you tell me the difference between UB802 and Xenyx 802 (apart from the colour!?) many thanks Richard The microphone preamps are ...

...has mid and high frequency cutoff built in, what you should do is to mix the two preamp signals in a small mixer and send those to a POWERED subwoofer OR to an amplifier that is driving the

...signals. If you are using a powered mixer, you will do this as an "insert" using the insert effect jacks. The preamp signal goes to the "in" of the destroyer, and the "out" goes to the following

preamp sections (think unpowered audio mixer) and power amp sections (Crown rack-mount amp). An excellent way to isolate audio problems if amp is still producing audio is to check the preamp out (line

...mixer and friend of mine plug into 240v power point, blown the two transistors ou. I do not know what short of transistors are they? There are dozens of transistors in the unit... we can't guess ...

low output on preamp There are many "preamps" within this unit. Can you describe the exact setup and symptoms you are seeing this. Also describe the cabling ie, balanced... etc.

...mixer unit, has all leds lit ,is responding to mic. input, bur is not producing any ourput to speakers, can you advise please. ALL LED's should NOT be lit all the time. If thsy are, there is a ...

mixer that has built in Phantom power or a source of Phantom power, then you need a mic preamp that can supply the phantom power. Here is an example device, but DO shop[ around as you should find some

...preamp up to my computer? Either through your computer's soundcard (1/8" mic input) or you'll have to get an interface such a an M-Audio FastTrack. There has to be something that converts the analog ...