how do i get the effects to work? cant seem to get the effects to turn on, for behringer pmp3000 You have to select an effect, push down the selector knob to lock it in. You have to send signal to the
How to get efx to work You are aware that there are no built in effects, correct? Are you connecting an off board effects unit and having problems with that? You should be connecting the effects send ...
how to send effects to microphones You CAN'T send ANYTHING to microphones since they are INPUT devices. If you want apply effects to the audio coming FROM them then this is what you do: Adjust the ...
Question about Music
Zoom 9030 Multi Effects Processor - Reverb. I am looking for a link for a Zoom 9030 guitar effect to a site with a PDF or manual please? Question edited for a lot more clarity. ZOOM 9030 ADVANCED ...
line 6 how do i get it to work how to make it work,i have it plugged in but no effects Line 6 connected to AC power and LED showing power to unit. Guitar into effect input, effect output to guitar amp
...There are SEVERAL things to set. First is setting the EFX mix for those channels you want the effects to be active. Next, select the effect you want AND the TIME for the effect and FINALLY the ...
crate flexwave 120 tuner and all effects stoped working Often the tuner and effects operate off of a 5 volt power supply and if this part of the main supply fails, the tuner and effects cease ...
How To Use The effect Loop? The effect loop is to use exteernal effect module... It is NOT to use guitar pedals !!!! The signals are line levels, NOT guitar type levels. An example of a device might ...
hi i have an Allen and Heath ZED 22 with no onboard effects. I would like to use an external Behringher unit but am having difficulty in connecting the processed signal back to the mixer. i would like
2 questions posted
Usually answered in minutes!
1 Questions
9 Questions
