Question about Panasonic Office Equipment & Supplies
light flashing RED than lamp circuit failure, or abnormal function or lamp unit is damaged. In this case projector doing the same behave just like your projector. if TEMPERATURE indicator illuminating
...light turns red and the temp light blinks red. I have checked the cleaned the air filter, but I still can't get it to come on. Any suggestions? Hi, if the Lamp error and Temperature error lights are ...
...light. The button flashes red for a few minutes and then the projector turns itself off. This only happens sometimes; the projector can play for hours in a completely normal manner. sounds like a ...
...red status light This project has a flashing red status light and no lamp The projector will turn on and the start up process is normal until the light should turn on. Then status light which started ...
Question about NEC Office Equipment & Supplies
...red status light on NEC VT45 projector There is a flashing red light on our school's VT45 projector. The lamp has been replaced but the flashing red light remains. Any suggestions to try? make sure ...
...light flashes green for approximately 60 sec. then the Lamp light turns red, and the power light flashes red. Nothing is projected. I have contacted Hitachi, and was told to replace the lamp, and did ...
...light flashes green for awhile then goes red. Replaced the bulb same problem. I unplugged it then held the power button on and plugged the power cord back in. it started working correctly, and shuts ...
...light flashes then goes green. On/off button is pushed, red light flashes, fan runs then unit switches off (on/off power light goes to constant red). With the lamp blown, will I be able to get a ...
red light flashing Power light is red, temperature light flashing red. Hi Michael, There could be a number of causes starting with a clogged cooling channel. If you have not had your projector ...
...light both flash red, this indicates that the projector is overheating. Once the projector has cooled down the warning light would continue to flash red and the power light would be solid red. You ...
28 questions posted
Usually answered in minutes!
1,911 Questions
664 Questions
510 Questions
438 Questions
454 Questions