Proscan PS36800HR 36" TV "stay video input" Questions

...input selectors (Video 1,2,3 and Channel) they shake a little up and down. no matter on what input i make my connections i don't get any sound or image, if i select the channel input i cant ...

...input and I go to video the dvd runs but nothing shows on the screen it stays blank tried with other component input like av1 or av2 and tried also with replacing the connectors.by the way have you ...

I need to get to video3,it stays on 1 which is for the sat. My dvd is hooked up to video 3. On the remote press the TV/Video key repeatly until the desired video input is selected.

...ability . Hook cable-in to source then go out to TV video input.TV would stay on video input as a monitor........T. PS. If you want the tuner part # , please provide service # from back of

...INPUT 3 and the VIDEO 3 stays on the screen, take the Sony remote, point it at the TV and press the DISPLAY button until you see "DISPLAY OFF" on the screen. About 3 seconds later, the words should ...

...video input mode I can't get the little box up in the right corner to go away. With antenna selected as input, the box comes on for a few seconds and then goes away, but in video input mode, it just ...

...input and leave only the s-video it will have sound but the screen will stay black. big red the same thing going on all you have to do is just use one in put a t a time don't know why but it ...

input button or the channel buttons on the remote or the tv itself. I even tried reprogramming the remote and unplugging the TV. The screen just stays blue with the world Video in the top right corner

video modes or input botton.Or take the battery out like 20 mins of the universal remote to erase ur tv codes enter it again.Tries those buttons u pushes before,see if u can get out the video mode.All

video 5 wording stays on the screen Either change input or hit display button on the remote to remove it from the screen.