Protron PLTV-32 Television "adjust volume direct tv box" Questions

...adjust the TV to get more volume? Volume Bar increases with very little increase in sound. Doesn't seem to be putting out the ful 10 watts. If you use a digital cable box, it could be that the volume ...

...Direct TV in a few days but as of know I have to turn the TV off and on manualy.What year is this TV.I hope you can haelp me. Thank you Linde your best off calling philps at 1-888-philips to purchase ...

...direct connection to internet and TV. Buzzing noise stays pretty much the same in volume even when you increase the volume. I can't find anything in the audio set up to help out. But seems to ...

volume with the direct tv remote and it just locked. The screen is black with a box at the lower buttom displaying the wrod LOCKED. Can you please assist/or direct me in the right direction to coorect

...TV and MONO STEREO will flash in the upper left hand corner and the volume goes down. MONO flashes and the volumne goes up. Also, the volumne almost always goes up when a commercial comes on. Often a ...

...direct media playback 45,000:1 Dynamic Contrast: While viewing either very bright or very dark scenes, it can be difficult to distinguish main images which blend into the background. Dynamic Contrast ...

...volume up/down buttons on the TV) to choose the desired CC state. Press Menu to save or Last to cancel and return to the previous menu. Press after pressing Menu to return to the previous menu. If ...

...adjust the volume of this device seperately to recieve optimal audio. 2) If #1 is not the issue, you may wish to make sure that all your cables are properly and firmly connected. A loose connection ...

...volume, menu access.... neither from TV or remote. Just turns on and off. The channel it is set on work fine just can't adjust. ------ We had recently had cable installed and the tech ran the cable ...

...adjust volume from console not remote as usual Tries turn the Direct tv decoder box off/on button,or unplug and replug, so the software can run it upgrade.Take out the signal input as a HDMI or cable ...