Rockford Fosgate P3001 Car Audio Amplifier "remote bass control wire" Questions

remote bass control ports out there. Just get a phone cable and cut the one end off. There will be four wires. The inside pair get tied together and soldered to the wiper of a potentiometer, the outer

...bass remote that has a light glowing but turn knob up and down and no difference like simply not working no difference in bass? Posible causes, Plug used typical phone plug 4 wires not six waswires ...

...BASS 600 . I presume I have done all the wiring correctly , power,remote,line-in and ground. The Amp turns on with the green light ,so does the control box light comes on. But there is no sound from ...

...remote bass control they sent with it up and as soon as i did the bass stopped all together. I then unhooked the remote and still nothing, the subs hit as u are plugging it in, but once you got it ...

...bass up to 18 dB (wired remote control included for fingertip control) Preamp outputs And these are the details on the subs: Speaker Type Passive Speaker Diameter 12" Nominal (RMS) Output Power 400 ...

my protection light comes on when i turn up my bass controller an cuts off the sound to the subs how do i stop this so i can turn my subs up check ur ground wire and also ur remote wire.

...remote is no longer working then run a wire from a 12 volt source that turns on and off with your ignition something like your radio fuse in the vehicle fuse box. As far as the Bass Knob if it is ...

Remote Bass Level Control and control signal transfer between multiple SX amplifiers Here is the manufacturer's accessory page to the remote: http://www.kicker.com/zxrc Here is one on eBay: http://cgi

how do you get the bass remote to work, when i plug it in i still cant control the bass the remote wire is just to turn the amp on and off. it doesn't really turn the bass up or down.

...bass boost remote controll on this amplifier, it seems to make the bass lag. Almost like the bass has a delay and not running synchone with the music. When i unplug the remote, all sounds normal. Is ...