alpine pdx-m12 blue light fiashing If the blue light is flashing it means the output mosfets are taking more than what the power supply can deliver. Probably just one of the MOSFETs is bad. Take off ...
Question about MTX Car Audio & Video
...36 F DN hafler use international rectifier hexfets. there is alot of confusion what constitutes a mosfet amplifier. if the outputs are mosfets instead of bipolar transistors, it is a mosfet amp. ...
blown mosfet Hello dancisbrown, If you or someone you know is relatively skilled at soldering, you should be able to replace the MOSFET. The problem may be in determining a suitable replacement. First
need mosfets for hifonics amp sfp50n06 were can I buy these transistors sfp5n06. I cant seem to locate anybody that supplies them. this goes for any hifonics amp, I had problem looking for other ones ...
...amp open and prod around a bit. I found that the failure is usually in the power components or the MOSFET drivers. If you have 1 channel out, I would focus on the MOSFETS (if you dont know what they ...
Protect LED on The Protect LED is on and of course there is no output. My guess is one, or more, of the power transistors or one of the MOSFETs is gone. Can anyone give me an idea as to how to check ...
Unit blows the fuse on power up. This happened after it was working fine at low level, next power up the fuse blows. Checked large 5600uf caps are ok, removed the four 0N05HD MOSFETS and fuse does not
Question about Rockford Fosgate Car Audio & Video
the power light is coming on changed all mosfets but i am still not getting no output this amp was damaged due to strands getting inside of the board and 3 mosfets have burned Your IC,S in it got ...
Question about Phase Linear Car Audio & Video
free manual for mosfet phase linear upa424 240watt amplifier I need a the manual for mosfet phase linear upa 424 amplifier it wont turn on and the fuses are good. You do have 12 volts connected to the
Question about Earthquake Sound Car Audio & Video
my amp earthquake ph d2 output mosfet number...rfp 40n10 earthquake sound factory send me the replace mosfet, but the number is p50ne 1 ..but i´m not shure is that same number of the part. I take
96 questions posted
Usually answered in minutes!
58 Questions
47 Questions
26 Questions
21 Questions
18 Questions