New World Spirit 110 (Gas) Kitchen Range "changed time oven clock goes" Questions

...oven, the basic warranty was one year, but the electronics was covered for five years. That covered the dim display replacement the first time at least. I will try the suggested capacitor replacement ...

...on the new clock. Setting of the clock involves pressing the minute minder button & cook time button (old clock was set by pressing the cook time & stop time buttons). Hope this is not too

oven door lock works,but self clean cycle,goes back to begining after setting time for cycle. tried reset buy knocking power breaker for 5min ---no change--- If resetting the power did not fix it, the

oven. It is activated when the knob is turned on and is also connected to the timer clock, so that power is only provided when the timer reaches the cooking start time, or the timer is not being used.

...changed only the clock display from the time to 12hr display. I turned the braker off, nothing happened. Any input would help. Oh, by the way, the oven and warming drawer works, the problem lies only ...

...clock stop working. My digital display does not show anymore. Nothing lights up on the display, but when you press any button you can hear it. What do you think I need to change? There is no problem ...

...oven.) Give a few minutes and I'll post back.... Still looking for that part? I found it here: http://www.partstore.com/sl/2/indexd5008.html I understand why they won't let Bgillespie sell you the ...

...oven nor the front left burner works. The repairman has to replace a EOC on the back of the control panel and another one in the back on the bottom. The total cost for parts alone is $438 then add in ...

...time auto-clean is done. To safely work around the problem, the thermal fuse may be replaced with a thermostat, which will reset itself once the oven has partially cooled off. If the part number of ...

...time the wires go underneath the oven so I just had to pull out the drawer to get access. The connectors underneath were a couple spade bits so one wire from my new ignitor was all set and I just ...