Mitsubishi WD-65738 DLP TV "replaced lamp blinking" Questions

replaced lamp but lamp light still blinks orange I have a wd-57731 and the picture disappeared bu there was still sound. The lamp light blinked orange. i replaced the lamp turned the tv on and the ...

replaced new lamp lamp light still blinks Hello, make sure that all the covers are on properly, was the old lamp broken? If it wasn't it may have not been the problem, sometimes the ballast board will

...then lamp light blinks Timer light blinks maybe twice then lamp light blinks serveral times, tv won't power on. Could it just need a bulb replaced? Yes. It is most likely a lamp replacement

...replaced lamp on mitisubishi WD-60735. The Lamp light is still blinking yellow, the timer light lit up green, but lamp still blinking yellow Are you sure you installed the lamp properly and put the ...

...blinking" lamp light on front panel display. I belive there is a "lamp motor" and it was maing an ever increasing humming sound prior to my picture going out. Does the blinking "lamp" light on front ...

...replaced the lamp. The timer light keeps blinking and I can not turn the tv on. Any ideas? I was thinking it could be the ballast since the old bulb had shards of glass on the inside, I thought it ...

...lamp bulb was replaced today and the timer light is blinking green. It was reset and the tv was turned off, then the lamp light started blinking. The lamp light is not currently on, but the timer ...

...lamp replacement to get the "yellow" blinking to stop. if the status is blinking red then you may be having a fan failure internal to the tv. also make sure that the side filter door is installed and ...

replaced the lamp now the timer light blinks then goes off then if i press the power button the status light starts blinking red, 4 blinks. any suggestions? The lamp is either defective, not connected

replaced lamp. Then I turned it on blinking green light and then yellow. can you help troubleshoot yellow blinking or not? if blinking your lamp cover is open that could be you forgot to reconnect the