Sherwood RX-4105 Receiver "4109 turn" Questions

...4109, but as soon as i turn on any component the receiver shuts off. in the beginning i thought it was the timer, but it wasn't. what the hell could it be? The output transformers may-be gone looking ...

...4109 . . . I have to keep volume very low or it will shut itself off. Any help to correct this problem would be appreciated. If Both speakers are working at a low volume and you turn it up and it ...

...turn it on (sherwood xr-4109) turns off as soon as it turns on Check the speaker wiring in the back. Make sure it is not wired improperly. You could remove the speaker wiring from the back of the amp ...

my Sherwood RX-4109 sounds "quieter" and "muddier" than it previously did. Also the "click" when it turns on in quieter. Wondering what this could mean Main board fault. Shorted component/s at its ...

i turn the receiver on, it lights up, and it shuts off. Why? i turn the receiver on, it lights up, and it shuts off after a few seconds. Bad News, it will need repair, I suspect output transistors. ...

4109 has no sound what do i do Tried turnin up volume Pull the sherwood power cord from the wall for 20 minutes. On the back of sherwood, check all cables and make sure they are in the correct places.

After working perfectly for 2 months, now receiver won't turn on either manually or with remote. Please help, is it getting power, if so check the manual for an internal fuse. you might have over ...

why does receiver turn on a few sec. then makes a click sound toward the back, shuts off I may have blown it. I was cranking it up, and then some smoke came out of it. Now, all it does is turn on ...

...4109 receiver SherwoodReceiver/Amplifier5027 SherwoodReceiver/Amplifier5027 always press the mode key of the device they want to control before pressing any other key Power on the device Press and ...