Teac AG-V8060 Receiver "dirty volume pot" Questions

...Dirty volume control. Try injecting cleaner inside. You might also try leaving unit off and turning the volume control back and forth many times to clean the contacts and then see what happens. Worse ...

...volume potentiometer is dirty and not tracking properly. Clean it by turning unit completely off and then turning the volume control from full clockwise position to full counterclockwise.-- Repeat ...

...volume control thinking a dirty pot was the problem but this doesn't help. The speakers and wires aren't the problem. Any ideas? Thank You, John Canfield, Ohio Turn it off and vigorously operate all ...

...to fail. This creates noise in the signal line that is being amplified. The other cause of this is dirty volume controls. Try spraying the pot with an electronics cleaner first. Keep us posted. ...

...volume and can't hear all tracks. No problem with speakers. Solutions? Sounds like a dirty pot. With the receiver off turn or slide it back from one side to the other. Test it, if its a little better ...

dirty as opposed to a circuit or component failure. A couple of years ago, I sprayed circuit cleaner into the pot as best I could and the problem disappeared but, it has returned. My next attempt will

...volume). So, what does a broken wisher at the "fade in" pot do? The Recorder "thinks" that You selected an "endless" fade in time, and the result is : no record level. You can do an easy "quick and ...

...volume control you might be at their mercy as far as finding one from another source that fits. You have a dirty potentiometer. You may be able to clean it with some good electronic cleaner. The best ...

...volume knob is dirty. Behind the face of receiver the "pot", (as they are called) needs sprayed with contact cleaner. I use CRC QD contact cleaner. If the volume is a slider your can use the straw ...