Teac DUAL CASSETTE A/R 110/220 Single Dual Cassette Deck "tape counter" Questions

...tape counter stops. (If you dismantle this unit be sure to work in an orgainsed fashion,& you will need some tiny Phillips head screwdrivers too) If your not confident then dont proceed. The tape ...

...tape it may stop randomly and the counter displays zero. I have to push play button again and it goes on; but may stop after a while. It does not depend on cassette type or tape length (I use 60 and ...

tape deck. Real time counter/Reset is showing 0000 when it is on. Tape is moving but stops with a few second. could you kindly suggest the problem. If you are having circuit diagram and service manual

...the speed however you need to have a frequency counter and speed alignment tape to adjust the speed correctly. There was also suppose to be oiling of the mechansm at the time the belts were put

when play button is pressed counter doesn't move and player stops Hi, Change the counter belt.

counter and test tape or test tape and wow and flutter meter. I look at this from a Technician's point of view as I have been fixing units for 45 years so far. Once the motor speed control is found it

...from a supplier. The service manual will not tell you how to put them in it just shows location. You need a speed test tape and frequency counter to set the speed anyway- best done by a

Tapes will not play when you press play the counter moves on really quickly. The reel table is turning but the pinch roller is not engaging. Depends on the model which you do not list.

...on the back of the servo motor. You need a speed alignment tape and frequency counter or wow and flutter meter to do this adjustment correctly. Often times the speeds go up as the motor start to

...Works fine except RPM of RH desk is a bit slow. It may need a calibration with a speed tape and frequency counter or wow and flutter meter. You should make sure the Pinch Roller is clean