Question about Zenith Televison & Video
...line means that vertical section is not osilating. it may be the vertical output ic is defective or theres no power supply to the vertical ic.check the parts that is connected to the vertical ic one ...
Question about LG Televison & Video
...vertical line on my t.v screen in center? I have a LG chana t.v. its main ic is LA76810A and vertical out put ic is LA78040.. flyback no 1010.. when I turned on my tv the white vertical line comes on ...
vertical line in center sanyo ds31650 If the line is "vertical" then the vertical circuit sounds OK. The problem would be in the horizontal deflection. Check yoke connection and solder around horz ...
Question about Sanyo Televison & Video
vertical line in center have replaced vertical output ic vertical line in center replaced vertical output ic If the line is vertical then the problem is no horizontal deflection. The vertical chip is ...
vertical line Your unit have a problem on a vertical output section. Parts that are going to check are the ff: 1. Fusible resistor lined in 24v supply at the flyback. 2. Vertical output I.C. 3. ...
...vertical line in the center of the screen when you turn it on. The picture would show and then get to a narrow vertical line. Now there is no picture at all except the white vertical line. Thanks The ...
...Vertical Collapse?" means one bright hor.line in the middle of screen. this problem can be solved 1 check vertical yoke connector or wire loose 2 check supply to vertical section which normally comes ...
...vertical line.I replace the vertical ic #ta8403k and the caps in the vertical stage still has the line with perfect sound. A vertical line means the line is up and down in the middle of the screen. ...
(it is a vertical problem) If its a Vertical line (it a horizontal problem) So it could be just a bad solder joint or a component has failed in the horizontal or vertical section. Hope this is helpful
line) indicates a problem in the vertical circuit.First step is to solder the pins of vertical o/pIC.........Next, troubleshoot vertical circuit to look for problem...T. Please rate solution..........
15 questions posted
Usually answered in minutes!
217 Questions
184 Questions
127 Questions
77 Questions
73 Questions